Introduction: Flashing the Lenovo a3000 tablet computer requires us to study seriously, because the Lenovo a3000 tablet computer is not so smooth to use, you can To get a quick solution through flashing, the editor will introduce the flashing tutorial of Lenovo a3000 tablet.

1. Preparations for flashing Lenovo A3000:

First: Flashing the Lenovo a3000 mobile phone requires clearing all personal data inside the tablet. Therefore, before flashing the Lenovo a3000 tablet, you must back up the important data inside it. The backup data is: Contacts and other information can be backed up by Le Assistant.

Second: Flashing the Lenovo a3000 tablet computer has very high requirements on the data cable. Compared with the data cable that is usually connected to the computer, the requirements are higher, so When choosing a data cable, try to use the original data cable or a relatively high-quality data cable to connect to the computer used for flashing.

Third: After preparing the data cable to connect to the computer, you also need to install the corresponding driver for Lenovo a3000 .

Fourth: Download and install the Lenovo a3000 tablet flash tool.

Fifth: After completing the download of the flash tool, download the Lenovo a3000 flash package.

2. Flash steps for Lenovo a3000 tablet:

Step 1: After downloading the Lenovo a3000 flash tool, unzip the flash tool, then enter the directory SP_Flash_Tool_v3.1308.0.125 of the Lenovo a3000 tablet flash tool, use the mouse to click on flash_tools.exe and enter, then the software will enter Run the page. Then there is an option on the right side of the software, the content is DA DLAll With Check Sum, check this option after finding it.

Second step: After decompressing the Lenovo a3000 tablet flashing tool, you will get a folder named target_bin, and then flash it Find Scatter-loading on the right side of the tool and click it, then select MT6589_Android_scatter.txt in the decompressed folder target_bin and click it with the mouse to open it.

Step 3: Then find USB Mode, DA Download and Options and select them.

Step 4: After entering Firmware Upgrade, click the reset button.

Step 5: Enter the flash machine and wait for a while.

Step 6: If OK appears, flashing is complete.